Welcome to Minetown!
To join our community, please login or register!
Internet Explorer
Internet Explorer is not supported. Please upgrade to a more modern browser.

[Enjin Archive] Area protection
Started by [E] CyberDrifter

I would like my area protected. I have submitted PEs and they have been addressed as done, however if I do a /cinfo command I get "This grass (or stone . . .) is not registered."

I tried to attack a picture from the website world map but it would not upload as part of this post.

My area is (direction are according to map not /pos) :

SW 2574, 4066

NW 2574, 4266

NE 2350, 4266

SE 2350, 4066

from block 1 to 127 (I ran out of sky when building, poor planning lol)

Area marked with signs on Giant Red Mushrooms at current ground level.

This area includes what looks to be an inaccessible temp dwelling, it it cannot be included in my area my proposed border modifications to the east border would be:

SE1 2350, 4167

SE2 2380, 4167

SE 3 2380, 4066

Thanks, CyberDrifter

To check if you have protections, you don't do /cinfo what you do is you get a piece of string, and you click the ground. If it comes up as registered, then your good to go. If it says its unregistered, then talk to a mod about since you have already made many Pe's
Thank you for the reply,

worked like a charm. This is my original area coords, I would like it if a mod could modifiy my area to the coordnates I have posted above.